Valence Surface Technologies 12 Locations
We’ve Got You Covered
Our 12 strategically located facilities give us a unique capability to serve our global customers from each of our four geographic regions. All sites operate under a common, best-in-class quality management system to ensure quality performance, reduce risk, and apply best practices across the enterprise to ensure optimal lead times. We invest significantly in each of our eleven facilities to provide complete service offerings and integrated solutions to you.
Eastern Region:
With our facilities in Eastman, GA; Blairsville, PA; West Springfield, MA; and Lawrence, MA, we cover the aerospace and defense market across the East and Southeast United States with a full complement of accredited services including NDT, Anodize, Paint/Spray Coatings, and Shot Peen including Bond Primer, covering a range of parts from very small components to parts over 20ft. in length.
Eastman, Georgia
Address: 415 Airport Rd Eastman, GA 31023
Phone: 478.201.9995
Operating Hours: 7:00 am – 5:00 pm
Valence Eastman, founded in 2005 as Dynamic Paint Solutions, has developed into the leading aerospace finishing company in the Southeast servicing commercial and business aviation markets as well as leading defense and space customers. Valence Eastman has grown through its focus on delivering the highest level of quality and service coupled with strategic investments in the most comprehensive offering in the region. Today, Valence Eastman offers a full range of NDT, shot peen, chemical process, and paint services out of its state of the art 140,000 square foot facility.
Springfield, Massachusetts
Address: 492 Prospect Ave. West Springfield, MA 01089
Phone: 413.781.4651
Operating Hours: 8:00 am – 5:00 pm
Valence Springfield was founded in 1944 as the Fountain Plating Company, and specializes in critical engine and air frame components. We are certified by Nadcap for chemical processing, NDT and composites and we have an AS9100 quality management system. The original test audit for Nadcap was performed at Fountain.
Lawrence, Massachusetts
Address: 125 Glenn St, Lawrence, MA 01843
400 Canal St, Lawrence, MA 01840-1221
Phone: (978) 685-8300
Operating Hours: 8:00 am – 5:00 pm
Valence Lawrence was founded in 1986 as C.I.L. inc. in Lawrence, MA, and has developed into a leading full service aerospace metal finishing company in the Northeast servicing primarily the defense and aerospace markets. We are fully certified by Nadcap for chemical processing and plating, and we have a Nadcap AC7004 quality system. We are unique in our ability to process high volume small, medium, and large parts, with close tolerance and intricate masking.Valence Lawrence has grown through a focus on delivering the highest level of quality and service coupled with strategic investments in the most comprehensive offering in the region. Today, we offer a full range of chemical process, plating, and paint services. We also provide shipping services within the Northeast region. If you’re really in a hurry, ask us about our expedited processing services!
Pittsburgh, Pennsylvania
Address: 414 Innovation Drive, Blairsville, PA 15717
Phone: 724.459.5316
Operating Hours: 8:00 am – 5:00 pm
Valence Pittsburgh is located in west central Pennsylvania, in Blairsville about 45 minutes from Pittsburgh. We serve clients in the aerospace, defense, automotive, marine, mining, nuclear, and medical industries. We offer high quality metal finishing, electroplating, and industrial coating services. All coating, finishing, electroplating, and painting processes meet industry-accepted standards. Many of our processes meet or exceed the more stringent military standards. We accept orders ranging from just a few parts to thousands of finished pieces, often requiring multiple processes.
Central Region:
With our facilities in Wichita, KS, Grove, OK and Camden, AR we cover the aerospace and defense markets with a full complement of accredited services including NDT, Anodize, Plating, Paint/Spray Coatings, and Shot Peen including Bond Primer covering a range of parts from very small components to parts over 25ft. in length.
Wichita, Kansas
Address: 3939 W. 29th St. South Wichita, KS 67217
Phone: 316.202.3845
Operating Hours: 8:00 am – 5:00 pm
Valence Wichita, founded in 1991 as Chrome Plus International, is considered a world leader in aerospace finishing and is valued by its global customers due to its industry leading capabilities and approvals covering the global aerospace market. Valence Wichita currently offers full NDT, shot peen, chemical processing, plating, grinding and honing, paint services and inventory management from its state of the art 100,000 square foot facility.
Grove, Oklahoma
Address: 2900 E Hwy 10 Grove, OK 74344-4119
Phone: 918.516.8068
Operating Hours: 8:00 am – 4:30 pm
Valence Grove, founded in 1988 as Pride Plating, has established itself as the leader for mission critical, high value parts and is the leading processor for the F-35 program, the world’s most advanced 5th generation multi-role fighter. Valence has grown from a small facility supporting the F-16, to a 140,000 square foot facility servicing parts up to 24 feet in length for major commercial aviation including all Boeing programs, business aviation OEMs such as Gulfstream, Honda Jet, and Bell Helicopter, and defense programs including the F-35, F-22, F-16, F-18, C-130 and many more.
Camden, Arkansas
Address: 347 Van Buren Street, Camden, AR 71701
Phone: 870.836.3388
Operating Hours: 8:00 am – 4:30 pm
The Camden location, formerly B&M Painting, is a premier paint and coating company in Arkansas. We specialize in aerospace paint and aerospace coatings according to strict NADCAP painting guidelines set in place for our industry. Our military aerospace coatings facility features everything your company needs to meet and exceed the quality standards set by your customer. We’re one of the leading aerospace painting companies providing quality service and dedication to behemoths of the industry like Lockheed Martin and Dassault Falcon. We welcome the opportunity to discuss and/or quote any business that you or your customers might require of our approved processes.
Western Region:
With our facilities in Seattle, WA, Everett, WA, Los Angeles, CA and Garden Grove, CA we cover the aerospace and defense markets from British Columbia, Canada to Mexico with a full complement of accredited services including NDT, Anodize, Paint/Spray Coatings and Shot Peen including Bond Primer covering a range of parts from very small components to parts 110ft. in length.
Seattle, Washington
Address: 8135 1st Avenue South Seattle, WA 98108
Phone: 206.457.2035
Operating Hours: 7:00 am – 3:30 pm
Valence Seattle, founded as MAPSCO in 1981, is the leader in the Pacific Northwest in processing small to medium sized precision parts for the aerospace industry. Valence Seattle sets the standard for on-time delivery, customer service, and quality. This is due to our relentless focus on quick and transparent communication, competitive and consistent turnaround times, and technical quality and processing expertise built over 35 years. Valence Seattle’s 30,000 square foot facility is located in the heart of Washington’s aerospace hub and offers full service NDT (penetrant and magnetic particle inspection), shot peen, aluminum and hard metal chemical processing, and paint services.
Everett, Washington
Address: 1520 80th St. Southwest, Suite A, Everett, WA 98203
Phone: 425.224.3886
Operating Hours: 7:00 am – 3:30 pm
Valence Everett, founded in 1981 as Blue Streak Finishers, is a full-service aerospace finishing company serving the dynamic Pacific Northwest industry. Valence Everett is a leader in large part processing with 30-foot capability for NDT, shot peen, chemical processing, and painting. The Company operates out of 50,000 square feet in 2 facilities in close proximity to Boeing and many of the world’s leading aerospace manufacturers. Valence Everett has earned NADCAP merit status and the trust of its customers due to its responsive service, industry-leading lead times and stellar quality rating.
Los Angeles – Paramount, California
Address: 7721 Jefferson St Paramount, CA 90723
Phone: 562.531.7666
Operating Hours: 8:00 am – 4:30 pm
Valence Los Angeles, founded in 1968 as Tri-Process Company, has been an industry leader in shot peen and peen forming services for nearly 50 years. Valence Paramount is known for its innovation and technical expertise and was one of the first finishing companies to achieve NADCAP accreditation in the 1990’s. Valence Los Angeles operates over 20 shot peen machines and has large envelope gantry and pass through peen equipment capable of processing parts up to 65 feet in length.
Los Angeles – Garden Grove, California
Address: 7061 Patterson Dr Garden Grove, CA 92841
Phone: 714.252.6644
Operating Hours: 7:00 am – 3:30 pm
Valence Garden Grove, founded in 1987 as Coastline Metal Finishing, is considered the leading finishing company for precision components for the commercial aviation, defense, and space industries. Valence Garden Grove has earned the trust of the most advanced and exacting satellite, space, UAV, and defense companies due to its unparalleled technical expertise and unrelenting focus on quality and customer service. Valence Garden Grove maintains merit NADCAP status and provides chemical processing including cleaning, Type II and Type III anodize, and chemfilm and plating including matte and bright silver, gold, electroless nickel, copper, tin, selective plating and more.
Los Angeles – Lynwood, California
Address: 2605 Industry Way, Lynwood, CA 90262
Phone: 323.563.1338
Operating Hours: 8:00 am – 4:30 pm
Valence Lynwood, previously known as both Triumph Processing, Inc. and DV Industries, was founded in 1957. For over 60 years, we have been a leader in metal finishing for the aerospace (both commercial and business aviation) and military / defense industries.
Regarded for large part processing, we offer tanks 110 ft in length, with NDT and paint capabilities to match. Spanning 2 facilities of over 170,000 sq. ft., there is no job too large for us.